Oils & Greases

Multipurpose food-grade gel for general lubrication in food and beverage processing. Compatible with most elastomers and plastics.

Fully synthetic food-grade gel with low-temperature performance — suited for refrigerated and cold-chain processing environments.

Food-grade synthetic PTFE gel with strong tack — designed for sealed bearings and re-lubrication-free applications in food processing and general industry.

Food-grade (US) high-performance grease rated to 750°F — suited for ovens, dryers, and high-heat equipment requiring food-safe compliance.

Non-melting food-grade (Canada) extreme-temperature gel rated to 750°F — OEM recommended for injection molding, bearings, and high-heat industrial applications.

Food-grade gear oils for enclosed gear systems in food and beverage processing — available in mineral and fully synthetic formulations.

Food-grade hydraulic oils for processing equipment operating in regulated environments — available in mineral and fully synthetic formulations.

Food-grade compressor oil for air compressors in food and beverage plants — Pro-Last FGX is the fully synthetic formulation for extended service life and high-temperature stability.

Food-grade high-heat oven chain oils — suited for automated lubrication systems in continuous bakery and processing oven applications.

Food-grade high-performance belt and chain lubricant stable from -40°F to 800°F (intermittent) — applied directly to hot moving parts, no cooldown required. Resists water, acids, and detergents. Suited for chains, sprockets, belts, shafts, and open gears in high-heat, high-humidity food processing environments.

Industrial EP / anti-wear greases for bearings, gears, and general industrial machinery operating under high loads.

Heavy-duty synthetic PTFE gel with strong tack — available in industrial viscosity grades for sealed and hard-to-reach bearing applications.

Non-melting extreme-duty EP and anti-wear grease with synthetic thickener technology fortified with titanium. Water-resistant and highly adhesive — designed for gears, chains, and exposed components in demanding outdoor and industrial conditions.

Extra-heavy, extremely tacky and adhesive formulation of Titanium-G rated past 500°C (932°F) — engineered for 5th wheels, large open gears, and the most demanding construction, rail, mining, and trucking applications. Aggressively resists water washout.

Custom-formulated industrial greases available for specific applications — contact us with your operating conditions and requirements.

100% synthetic AO compressor and circulating fluid with ashless additives — excellent thermal oxidation resistance, anti-wear, and demulsibility across a wide temperature range. Stays clear and practically odourless longer than conventional oils.

Extended-duty version of Pro-Last X — formulated for heavy-duty screw compressors requiring 6,000+ hours of service life under normal operating conditions.

100% synthetic non-food-grade vacuum pump oil — engineered for mechanical vacuum pumps requiring high thermal stability and low vapour pressure.

Blended industrial gear oil for enclosed gear systems — a cost-effective solution for general industrial gear applications.

100% synthetic industrial gear oil for demanding enclosed gear systems requiring extended drain intervals and high-temperature performance.

Custom-formulated industrial oils available for specific applications — contact us with your operating conditions and requirements.

Fluorinated anti-corrosion grease, chemically inert to acids, oxidizers, and chlorine — for bearings and equipment in reactive or oxygen-compatible service.

Heavier-grade fluorinated grease for higher-load bearings exposed to aggressive chemicals, chlorine, or oxygen environments.

Fluorinated high-temperature grease with silica thickener — handles higher operating temperatures than PTFE-thickened greases while remaining chemically inert in reactive environments.

Fluorinated vacuum pump oil for mechanical pumps and reactive gas handling — chemically inert and non-flammable in oxidizing or hazardous service.

Heavier-viscosity fluorinated vacuum oil for demanding pump applications, cryogenic service, and continuous operation with reactive or corrosive gases.

Additional PFPE and PCTFE-based specialty lubricants available — contact us for selection assistance based on your chemical environment and application requirements.

Industrial injectable fluid sealant formulated to control shaft seal leakage in pumps, valves, and agitators. Stable under high shear, pressure, and temperatures from -40°F to 750°F (-40°C to 399°C) with excellent water repellency and corrosion resistance.

Heavy-duty injectable sealant compound for rotating equipment — engineered for high-shear and high-pressure packing applications where traditional packing may fail.

Food-grade injectable fluid sealant for use in food processing, pulp and paper, and regulated environments — same temperature range and performance as IFS 4001 with USDA H-1 approved formulation.

High-performance IFS compound for severe-duty valve and pump sealing applications — suited for mining, textile, and demanding industrial environments requiring superior sealing under extreme conditions.

Group III, IV, and V base oils including diesters, polyol esters, complex esters, and functional esters — synthetic and biodegradable options available.

Extreme pressure and anti-wear additives (ashless and non-ashless) for gear, transmission, bearing, and compressor applications — food-grade grades available.

PIB, PMA, OCP, HSB, and PAO-based viscosity modifiers plus PMA, fumarate, and vinyl acetate pour point depressants — food-grade grades available.

Rust and corrosion inhibitors, metal passivators, lubricity additives, seal swell additives, friction modifiers, and antifoam additives — silicon and non-silicon options, food-grade grades available.

Custom-formulated additive packages for motor oils, transmissions, differentials, compressors, turbines, pumps, and oven chains — industrial and food-grade grades available.