Skip to Content

Food-Grade & Industrial Oils and Greases

All lubricants are formulated and manufactured at our plant in Canada. Most food-grade products are NSF H1 registered, and several are accepted for use in Canadian food plants. Every product is made in an allergen-free facility. Available in a range of viscosity grades and package sizes — contact us for selection help, a quote, or technical data.

Not sure which product fits? Use the lubricant selector to narrow the range by application, temperature and conditions.

Food-Grade Greases

Non-soap, non-melting food-grade gels (PTFE, silica and synthetic thickeners) for incidental food contact in regulated processing environments.

KG Series (KG 100 / KG 200)
Multipurpose PTFE-thickened food-grade gel on USP white mineral oil, -20°C to 180°C, NLGI 00 to 2. Under 1% water wash-out, and it won't drip when hot. NSF H1 (KG 100 reg. 162656, KG 200 reg. 169956).
Food-Grade
KG SX Series
Fully synthetic (PAO) PTFE food-grade gel for cold rooms, freezers and wash-down, -48°C to 235°C: the widest range in the KG family. NSF H1 reg. 169944.
Food-Grade
SBG Series
Synthetic PTFE sealed-bearing gel in seven grades: SBG 22/HS, 68, 100, 220, 460, 1200 and 1600 (base oil ISO 22 to 1650, NLGI 00 to 3). From -48°C up to 425°C intermittent depending on grade, with 3% or less water wash-out. Made with NSF H1 EP/AW additives and meets FDA 21 CFR 172.878 and 178.3620(a).
Food-Grade
Fahrenheit F800
NSF H1 bearing gel for -35°F to 750°F that won't melt, drip or carbonize, with relubrication intervals up to 10 times longer than conventional greases. For ovens, dryers and high-heat equipment.
To 750°F
Thermo-Gel 40750
Non-melting synthetic food-grade gel from -40°C to 398°C (-40°F to 750°F), NLGI 00 to 3. CFIA approved and accepted in Canadian food plants since 1987; a favourite for oven bearings and plastic injection molding.
To 750°F
BKG Series
Fully synthetic food-grade gel on a biodegradable base oil — for conveyors, mixers and hot bearings where an environmentally preferable lubricant is wanted. -18°C to 235°C (0°F to 455°F).
Food-Grade

Food-Grade Oils

Available in synthetic (denoted -P or -X) and non-synthetic formulations across multiple viscosity grades.

Gear Oils
TGGL / TGGL-P
Thermo-Gear EP food-grade gear oil for enclosed gearboxes, ISO 68 to 680, on Canada's approved list since 1999. TGGL-P is the fully synthetic version.
Food-Grade
KGL
Extreme-pressure food-grade gear oil (synthetic blend) for enclosed gearboxes, ISO 68 to 1000. NSF H1 reg. 169958.
Food-Grade
Hydraulic Oils
TCCL / TCCL-P
Thermo-Cling anti-wear hydraulic and machine oil. TCCL is on USP white mineral oil (ISO 22 to 460); TCCL-P is fully synthetic (ISO 22 to 680). NSF H1 reg. 161471, Kosher and Halal.
Food-Grade
Seamer Oils
TCCL 150 D
Food-grade ISO 150 seamer oil with a demulsifier, so it sheds water and product instead of emulsifying. A direct equivalent to the food-grade can-seamer oils commonly specified in canning and bottling plants.
Food-Grade
Compressor Oils
Pro-Last FG / FGX / FGE
Food-grade compressor and circulating fluid for air compressors in food and beverage plants. FGX is fully synthetic (NSF H1 reg. 169954, Kosher and Halal); FGE grades are for screw compressors needing more than 8,000 hours of service life.
Food-Grade
Vacuum Pump Oils
Pro-Last VPO FGX
Synthetic NSF H1 vacuum pump oil for food and beverage plants, ISO 15 to 100 — 8,000+ hours oxidation stability.
Food-Grade
Pro-Last VPO FG
NSF H1 vacuum pump oil on USP white mineral oil for food plants, ISO 15 to 100, with 2,000+ hours oxidation stability and excellent cleanliness.
Food-Grade
Chain, Conveyor & Oven Oils
KCL 220 / 350
Fully synthetic ester NSF H1 high-temperature chain oils, -25°C to 320°C, with under 1.3% weight loss after 24 hours at 200°C. Low deposits, and they loosen carbon left by conventional oils. For automated systems on baking-oven chains, stenters, kiln chains and canning lines.
High-Temp
KCL 7
Fully synthetic ester NSF H1 chain oil for light-duty, fast-moving conveyor chains, including freezers: -50°C to 60°C. Penetrates the links without dripping, is almost odourless and cleans as it lubricates. Spray or wipe on.
Low-Temp
00T 800F
Food-grade high-performance belt and chain lubricant stable from -40°F to 800°F (intermittent) — applied directly to hot moving parts, no cooldown required. Resists water, acids, and detergents. Suited for chains, sprockets, belts, shafts, and open gears in high-heat, high-humidity food processing environments. Kosher and Halal.
To 800°F
Spirelta
Synthetic high-temperature food-grade machine oil for spiral ovens (about 240 cSt at 40°C). Very oxidation-stable with minimal carbon build-up, plus ashless anti-wear protection. Meets FDA 21 CFR 178.3570.
High-Temp
Way Oils
KemWay FG 68
Food-grade ISO 68 way oil for machine slideways and guideways where incidental food contact is possible. Formulated only from ingredients permitted under FDA 21 CFR 178.3570 (H1 criteria) and made in our ISO 21469-certified facility; a manufacturer's declaration of compliance is available on request.
Food-Grade
Direct Food Contact Oils
KRO Direct Series
NSF 3H direct food contact oil meeting FDA 21 CFR 172.878: a release agent for grills and ovens and a pan-divider oil for breads and buns. KRO Direct in ISO 15, 22, 32 and 46; KRO Direct-10 is the light grade (8 to 14 cSt).
NSF 3H
Seal, Barrier & Air-Tool Oils
Thermol BOP 2 / BOP 4
Fully synthetic, very high-VI barrier fluid for mechanical seals where lubrication and heat control at the seal matter. Pumps at extremely low temperatures (pour point below -70°C), resists oxidation at high temperature and stays light in colour. Meets FDA 21 CFR 178.3570.
Synthetic
Kemvec AT#1
Pneumatic airline and air-tool lubricant (ISO 22) on highly refined mineral oil, with rust inhibitors and non-varnishing additives for lubricators and air tools. Meets FDA 21 CFR 178.3570.
Food-Grade

Industrial Greases

Non-soap, non-melting greases and gels for demanding industrial, construction, automotive and mobile equipment applications.

TG AW Series
Thermo-Gel AW non-melting EP / anti-wear gels with no dropping point, -20°C to 315°C — for wheel bearings, steel mills, mining, forestry and construction.
Industrial
Thermo-Gel 800B AW #00
Extreme-pressure semi-fluid gel (NLGI 00) with an inert synthetic thickener and no dropping point. Extremely tacky and water-repellent, under 1% water wash-out. For large chain drives, mechanical presses, guides, couplings and slow gears in wet conditions on agricultural, logging, mining and construction equipment.
Semi-Fluid EP
SBG Series
The same synthetic PTFE gel in industrial service: the high-temperature SBG 460, 1200 and 1600 grades handle 370°C to 425°C intermittent, and SBG 22/HS is the low-temperature, high-speed grade. For sealed and hard-to-reach bearings.
Industrial
Titanium-G2
Non-melting extreme-duty EP and anti-wear grease with synthetic thickener technology fortified with titanium. Water-resistant and highly adhesive — designed for gears, chains, and exposed components in demanding outdoor and industrial conditions.
Extreme Heavy-Duty
Titanium-G3
Extra-heavy, extremely tacky and adhesive formulation of Titanium-G rated past 500°C (932°F) — engineered for 5th wheels, large open gears, and the most demanding construction, rail, mining, and trucking applications. Aggressively resists water washout.
Extreme Heavy-Duty / High-Heat
Gear-Gel 003
Synthetic semi-fluid gel with PTFE and molybdenum for fast-moving gears and gear reducers. High EP protection, -35°C to over 130°C.
Industrial
TBG 680
Fully synthetic, non-melting sealed-bearing gel for wind turbines and outdoor bearings with long relubrication intervals. -42°C to 165°C.
Industrial
APG 150
Full-synthetic NLGI 2 automotive grease with a non-melting silica / PTFE thickener for wheel bearings, chassis and trailers. -40°C to 180°C.
Automotive
Custom Greases
Custom-formulated industrial greases available for specific applications — contact us with your operating conditions and requirements.
Custom

Industrial Oils

Industrial lubricants for compressors, vacuum pumps, gears, chains, slideways, paper machines, hydraulics, metal forming and release.

Compressor & Circulating Oils
Pro-Last X
100% synthetic AO compressor and circulating fluid with ashless additives — excellent thermal oxidation resistance, anti-wear, and demulsibility across a wide temperature range. Stays clear and practically odourless longer than conventional oils.
Synthetic
Pro-Last XE
Extended-duty version of Pro-Last X — formulated for heavy-duty screw compressors requiring 6,000+ hours of service life under normal operating conditions.
Synthetic
Vacuum Pump Oils
Pro-Last VPX
100% synthetic non-food-grade vacuum pump oil — engineered for mechanical vacuum pumps requiring high thermal stability and low vapour pressure.
Synthetic
Gear Oils
Thermol G
Blended industrial gear oil for enclosed gear systems — a cost-effective solution for general industrial gear applications.
Blend
Thermol GP
100% synthetic heavy-duty gear oil, ISO 68 to 1500. Viscosity index of 156 to 203 and pour points down to -60°C, for enclosed gear systems that need extended drain intervals and high-temperature performance.
Synthetic
Chain Oils
Thermol 220 CL
Heavy-duty industrial chain oil for conveyor and drive chains.
Industrial
Paper Machine & Circulating Oils
Thermol PMX 220 / 320
Synthetic heavy-duty circulating oil for paper machines and hydraulic systems, also suited to high-temperature gears and rotary vane pumps. Very oxidation-stable with ashless anti-wear, good demulsibility, rust protection and no foaming; VI 162 to 171. Meets FDA 21 CFR 178.3570.
Synthetic
Fire-Resistant Hydraulic Fluids
Silvanol 46 / 68 HFD-U
Synthetic, bio-based ester fire-resistant hydraulic fluid. Flash point 322°C and fire point 350°C, VI 194 to 199, zinc-free ashless anti-wear, and readily biodegradable (OECD 301B over 70%). For electric arc furnaces, aluminium plants, mining, tunnels, quarries, foundries and incinerators.
Fire-Resistant
Metal Forming
Silvanol HX FG 150D
NSF H1 synthetic polyol-ester aluminium deforming lubricant (ISO 150) for drawing and stamping. Very high lubricity and oxidation stability, flash point 322°C, readily biodegradable from renewable sources. Incidental contact only, not for direct food contact.
NSF H1
Release Agents & Dry-Film Lubricants
Slip-Dry 50G
Water-based hot-plate lubricant concentrate for corrugators. Dilute with distilled water (typically 75/25) and spray on; the water evaporates and leaves a colourless, non-toxic, non-staining dry film. Also for mold release, metal slides and parts fabrication. Up to 150°C.
Water-Based
Slip-Dry 10E
Inherently biodegradable release agent made from food-grade raw materials that stays fluid in the cold (pour point below -35°C). For warehouse floors, truck trailers, farm feed chutes and metal slides. Up to 100°C.
Biodegradable
Custom Formulations
Custom Oils
Custom-formulated industrial oils available for specific applications — contact us with your operating conditions and requirements.
Custom

Fluorinated & Specialty Lubricants

PFPE/PCTFE-based greases and oils — chemically inert, non-flammable, and non-reactive to acids, bases, oxidizers, chlorine, and fluorine.

Fluorinated Greases
Kemplex 220
NSF H1 fluorinated anti-corrosion grease (100% fluorinated base oil with PTFE), -25°C to 260°C. Inert to acids, oxidizers and chlorine, for corrugator and mixer bearings and oxygen or chlorine service.
Fluorinated
Kemplex 440
Heavier NSF H1 fluorinated anti-corrosion grease, -20°C to 288°C, for higher-load bearings exposed to aggressive chemicals, chlorine or oxygen.
Fluorinated
Kemplex HT 460
Fluorinated grease with a silica thickener for much higher temperatures than PTFE-thickened greases, up to 399°C, and it won't carbonize. Chemically inert in reactive environments.
Fluorinated
Kemplex 215 / 435
Non-reactive fluorinated greases without corrosion additives — for bearings in contact with chemicals, and for O-rings and seals.
Fluorinated
Kemplex HM 7
PFPE hot-mold grease for segmented tire molds, -20°C to 288°C. Compatible with other PFPE greases, so no clean-out is needed when switching.
Fluorinated
Fluorinated Vacuum Pump Oils
Kemplex 220 VPO
Fluorinated vacuum pump oil for mechanical pumps and reactive gas handling — chemically inert and non-flammable in oxidizing or hazardous service.
Fluorinated
Kemplex 440 VPO
Heavier-viscosity fluorinated vacuum oil for demanding pump applications, cryogenic service, and continuous operation with reactive or corrosive gases.
Fluorinated
Additional Fluorinated Products
Additional PFPE and PCTFE-based specialty lubricants available — contact us for selection assistance based on your chemical environment and application requirements.
Specialty

Injectable Fluid Sealants (IFS)

IFS™ Injectable Fluid Seal replaces braided packing and mechanical seals in pumps, valves, compressors and agitators. It's topped up on-line with no shutdown, costs about one-tenth as much as mechanical seals, and can cut energy costs by 18 to 50%.

IFS™ 4001 (Black)
Premium black general-industrial grade, made from modified synthetic fibres and lubricants (non-asbestos). For pumps, valves, compressors and agitators that use packing or mechanical seals; pH 2 to 12. Molds to worn parts and won't score shafts.
Sealant
MSC™ 4000 (Black)
Mechanical sealing compound (regular grade) for valves and rotating-equipment packing, for high-shear and high-pressure service where traditional packing fails.
Sealant
IFS™ 5400 (White)
Select-premium white, food-grade (H1) grade with Canadian approval #3100-3/K090, for food and beverage pumps, hygienic valves and fine paper. Pumps to 3,600 rpm and 200 psi stuffing-box pressure, 0°F to 500°F (-17°C to 260°C); valves to 1,050 psi and 400°F; pH 2 to 13.
Food-Grade
IFS™ 6000HPC (Grey)
High-performance caustic grade, chemically inert across pH 0 to 14, for severe-duty valves and pumps in mining, textile and chemical service.
High-Performance

Base Oils

Synthetic and food-grade base stocks from the team that formulates our own lubricants, for formulators, OEMs and plants.

PAO & Group III Base Oils
Group III and Group IV (PAO) synthetic base oils in a range of viscosities — contact us with the grade and volume you need.
Base Oils
USP White Mineral Oils
Low-viscosity USP-grade white mineral oils, plus a food-grade ISO 100 base oil. Supplied in pails, drums, totes or bulk.
Food-Grade

Looking for ester base stocks or additive packages? Those are supplied by our sister company, Creochem Technologies.

Need a TDS, SDS, or selection help?

Tell us your application, temperature range, load conditions, and regulatory requirements — we'll point you to the right product or formulate something custom.

Request help or a quote